HL7 V2HL7 FHIR
NameDefinitionDataTypeNameDefinitionData TypeComments
ABS-01.00.00 - Discharge Care ProviderXCN
ABS-01.01.00 - Discharge Care Provider : Person IdentifierST
ABS-01.02.00 - Discharge Care Provider : Family NameFN
ABS-01.02.01 - Discharge Care Provider : Family Name : SurnameThe atomic element of the person's family name. In most Western usage, this is the person's last name.ST
ABS-01.02.02 - Discharge Care Provider : Family Name : Own Surname PrefixInternationalization usage for Germanic languages. This component is optional. An example of a <surname prefix> is the "van" in "Ludwig van Beethoven". Since the <surname prefix> doesn't sort completely alphabetically, it is reasonable to specify it as a separate sub-component of the PN and extended PN data types (XPN and XCN).ST
ABS-01.02.03 - Discharge Care Provider : Family Name : Own SurnameInternationalization usage for Germanic languages. This component is optional. An example of a <surname prefix> is the "van" in "Ludwig van Beethoven". Since the <surname prefix> doesn't sort completely alphabetically, it is reasonable to specify it as a separate sub-component of the PN and extended PN data types (XPN and XCN).ST
ABS-01.02.04 - Discharge Care Provider : Family Name : Surname Prefix from Partner/SpouseInternationalization usage for Germanic languages. This component is optional. An example of a <surname prefix> is the "van" in "Ludwig van Beethoven". Since the <surname prefix> doesn't sort completely alphabetically, it is reasonable to specify it as a separate sub-component of the PN and extended PN data types (XPN and XCN).ST
ABS-01.02.05 - Discharge Care Provider : Family Name : Surname from Partner/SpouseThe portion of the person's surname (in most Western usage, the last name) that is derived from the surname of the person's partner or spouse, as distinguished from the part derived from the person's own surname. This component is optional. If no portion of the person's surname is derived from the surname of the person's partner or spouse, this component is not valued. Otherwise, if the surname of the partner or spouse has legally changed to become (or incorporate) the person's surname, this is the surname of the partner or spouse immediately prior to such change. ST
ABS-01.03.00 - Discharge Care Provider : Given NameST
ABS-01.04.00 - Discharge Care Provider : Second and Further Given Names or Initials ThereofST
ABS-01.05.00 - Discharge Care Provider : Suffix (e.g., JR or III)ST
ABS-01.06.00 - Discharge Care Provider : Prefix (e.g., DR)ST
ABS-01.07.00 - Discharge Care Provider : Degree (e.g., MD)IS
ABS-01.08.00 - Discharge Care Provider : Source TableCWE
ABS-01.08.01 - Discharge Care Provider : Source Table : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.08.02 - Discharge Care Provider : Source Table : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.08.03 - Discharge Care Provider : Source Table : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.08.04 - Discharge Care Provider : Source Table : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.08.05 - Discharge Care Provider : Source Table : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.08.06 - Discharge Care Provider : Source Table : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.08.07 - Discharge Care Provider : Source Table : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-01.08.08 - Discharge Care Provider : Source Table : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-01.08.09 - Discharge Care Provider : Source Table : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-01.08.10 - Discharge Care Provider : Source Table : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-01.08.11 - Discharge Care Provider : Source Table : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-01.08.12 - Discharge Care Provider : Source Table : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-01.08.13 - Discharge Care Provider : Source Table : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-01.08.14 - Discharge Care Provider : Source Table : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-01.08.15 - Discharge Care Provider : Source Table : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.08.16 - Discharge Care Provider : Source Table : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-01.08.17 - Discharge Care Provider : Source Table : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-01.08.18 - Discharge Care Provider : Source Table : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.08.19 - Discharge Care Provider : Source Table : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-01.08.20 - Discharge Care Provider : Source Table : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-01.08.21 - Discharge Care Provider : Source Table : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.08.22 - Discharge Care Provider : Source Table : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-01.09.00 - Discharge Care Provider : Assigning AuthorityHD
ABS-01.09.01 - Discharge Care Provider : Assigning Authority : Namespace IDUser-defined table 0300 - Namespace ID is used as the HL7 identifier for the user-defined table of values for this component. IS
ABS-01.09.02 - Discharge Care Provider : Assigning Authority : Universal IDThe HD’s second component, <universal ID (UID), is a string formatted according to the scheme defined by the third component, <universal ID type> (UID type). The UID is intended to be unique over time with-in the UID type. It is rigorously defined. Each UID must belong to one of the specifically enumerated schemes for constructing UID’s (defined by the UID type). The UID (second component) must follow the syntactic rules of the particular universal identifier scheme (defined by the third component). Note that these syntactic rules are not defined within HL7 but are defined by the rules of the particular universal identifier scheme (defined by the third component).ST
ABS-01.09.03 - Discharge Care Provider : Assigning Authority : Universal ID TypeThe third component governs the interpretation of the second component of the HD. If the third compo-nent is a known UID refer to HL7 table 0301 - Universal ID type for valid values, then the second compo-nent is a universal ID of that type.ID
ABS-01.10.00 - Discharge Care Provider : Name Type CodeID
ABS-01.11.00 - Discharge Care Provider : Identifier Check DigitST
ABS-01.12.00 - Discharge Care Provider : Check Digit SchemeID
ABS-01.13.00 - Discharge Care Provider : Identifier Type CodeID
ABS-01.14.00 - Discharge Care Provider : Assigning FacilityHD
ABS-01.14.01 - Discharge Care Provider : Assigning Facility : Namespace IDUser-defined table 0300 - Namespace ID is used as the HL7 identifier for the user-defined table of values for this component. IS
ABS-01.14.02 - Discharge Care Provider : Assigning Facility : Universal IDThe HD’s second component, <universal ID (UID), is a string formatted according to the scheme defined by the third component, <universal ID type> (UID type). The UID is intended to be unique over time with-in the UID type. It is rigorously defined. Each UID must belong to one of the specifically enumerated schemes for constructing UID’s (defined by the UID type). The UID (second component) must follow the syntactic rules of the particular universal identifier scheme (defined by the third component). Note that these syntactic rules are not defined within HL7 but are defined by the rules of the particular universal identifier scheme (defined by the third component).ST
ABS-01.14.03 - Discharge Care Provider : Assigning Facility : Universal ID TypeThe third component governs the interpretation of the second component of the HD. If the third compo-nent is a known UID refer to HL7 table 0301 - Universal ID type for valid values, then the second compo-nent is a universal ID of that type.ID
ABS-01.15.00 - Discharge Care Provider : Name Representation CodeID
ABS-01.16.00 - Discharge Care Provider : Name ContextCWE
ABS-01.16.01 - Discharge Care Provider : Name Context : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.16.02 - Discharge Care Provider : Name Context : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.16.03 - Discharge Care Provider : Name Context : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.16.04 - Discharge Care Provider : Name Context : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.16.05 - Discharge Care Provider : Name Context : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.16.06 - Discharge Care Provider : Name Context : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.16.07 - Discharge Care Provider : Name Context : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-01.16.08 - Discharge Care Provider : Name Context : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-01.16.09 - Discharge Care Provider : Name Context : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-01.16.10 - Discharge Care Provider : Name Context : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-01.16.11 - Discharge Care Provider : Name Context : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-01.16.12 - Discharge Care Provider : Name Context : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-01.16.13 - Discharge Care Provider : Name Context : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-01.16.14 - Discharge Care Provider : Name Context : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-01.16.15 - Discharge Care Provider : Name Context : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.16.16 - Discharge Care Provider : Name Context : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-01.16.17 - Discharge Care Provider : Name Context : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-01.16.18 - Discharge Care Provider : Name Context : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.16.19 - Discharge Care Provider : Name Context : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-01.16.20 - Discharge Care Provider : Name Context : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-01.16.21 - Discharge Care Provider : Name Context : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.16.22 - Discharge Care Provider : Name Context : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-01.17.00 - Discharge Care Provider : Name Validity RangeDR
ABS-01.17.01 - Discharge Care Provider : Name Validity Range :Range Start Date/TimeThe first component contains the earliest date/time (time stamp) in the specified range.TS
ABS-01.17.02 - Discharge Care Provider : Name Validity Range :Range End Date/TimeThe second component contains the latest date/time in the specified range. Note that the TS (time stamp) data type allows the specification of precision.TS
ABS-01.18.00 - Discharge Care Provider : Name Assembly OrderID
ABS-01.19.00 - Discharge Care Provider : Effective DateDTM
ABS-01.20.00 - Discharge Care Provider : Expiration DateDTM
ABS-01.21.00 - Discharge Care Provider : Professional SuffixST
ABS-01.22.00 - Discharge Care Provider : Assigning JurisdictionCWE
ABS-01.22.01 - Discharge Care Provider : Assigning Jurisdiction : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.22.02 - Discharge Care Provider : Assigning Jurisdiction : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.22.03 - Discharge Care Provider : Assigning Jurisdiction : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.22.04 - Discharge Care Provider : Assigning Jurisdiction : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.22.05 - Discharge Care Provider : Assigning Jurisdiction : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.22.06 - Discharge Care Provider : Assigning Jurisdiction : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.22.07 - Discharge Care Provider : Assigning Jurisdiction : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-01.22.08 - Discharge Care Provider : Assigning Jurisdiction : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-01.22.09 - Discharge Care Provider : Assigning Jurisdiction : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-01.22.10 - Discharge Care Provider : Assigning Jurisdiction : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-01.22.11 - Discharge Care Provider : Assigning Jurisdiction : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-01.22.12 - Discharge Care Provider : Assigning Jurisdiction : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-01.22.13 - Discharge Care Provider : Assigning Jurisdiction : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-01.22.14 - Discharge Care Provider : Assigning Jurisdiction : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-01.22.15 - Discharge Care Provider : Assigning Jurisdiction : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.22.16 - Discharge Care Provider : Assigning Jurisdiction : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-01.22.17 - Discharge Care Provider : Assigning Jurisdiction : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-01.22.18 - Discharge Care Provider : Assigning Jurisdiction : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.22.19 - Discharge Care Provider : Assigning Jurisdiction : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-01.22.20 - Discharge Care Provider : Assigning Jurisdiction : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-01.22.21 - Discharge Care Provider : Assigning Jurisdiction : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.22.22 - Discharge Care Provider : Assigning Jurisdiction : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-01.23.00 - Discharge Care Provider : Assigning Agency or DepartmentCWE
ABS-01.23.01 - Discharge Care Provider : Assigning Agency or Department : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.23.02 - Discharge Care Provider : Assigning Agency or Department : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.23.03 - Discharge Care Provider : Assigning Agency or Department : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.23.04 - Discharge Care Provider : Assigning Agency or Department : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.23.05 - Discharge Care Provider : Assigning Agency or Department : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.23.06 - Discharge Care Provider : Assigning Agency or Department : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.23.07 - Discharge Care Provider : Assigning Agency or Department : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-01.23.08 - Discharge Care Provider : Assigning Agency or Department : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-01.23.09 - Discharge Care Provider : Assigning Agency or Department : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-01.2310 - Discharge Care Provider : Assigning Agency or Department : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-01.2311 - Discharge Care Provider : Assigning Agency or Department : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-01.2312 - Discharge Care Provider : Assigning Agency or Department : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-01.2313 - Discharge Care Provider : Assigning Agency or Department : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-01.2314 - Discharge Care Provider : Assigning Agency or Department : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-01.2315 - Discharge Care Provider : Assigning Agency or Department : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.2316 - Discharge Care Provider : Assigning Agency or Department : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-01.2317 - Discharge Care Provider : Assigning Agency or Department : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-01.2318 - Discharge Care Provider : Assigning Agency or Department : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.2319 - Discharge Care Provider : Assigning Agency or Department : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-01.2320 - Discharge Care Provider : Assigning Agency or Department : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-01.2321 - Discharge Care Provider : Assigning Agency or Department : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.2322 - Discharge Care Provider : Assigning Agency or Department : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-01.24.00 - Discharge Care Provider : Security CheckST
ABS-01.25.00 - Discharge Care Provider : Security Check SchemeID
ABS-02.00.00 - Transfer Medical Service CodeCWE
ABS-02.01.00 - Transfer Medical Service Code : IdentifierST
ABS-02.02.00 - Transfer Medical Service Code : TextST
ABS-02.03.00 - Transfer Medical Service Code : Name of Coding SystemID
ABS-02.04.00 - Transfer Medical Service Code : Alternate IdentifierST
ABS-02.05.00 - Transfer Medical Service Code : Alternate TextST
ABS-02.06.00 - Transfer Medical Service Code : Name of Alternate Coding SystemID
ABS-02.07.00 - Transfer Medical Service Code : Coding System Version IDST
ABS-02.08.00 - Transfer Medical Service Code : Alternate Coding System Version IDST
ABS-02.09.00 - Transfer Medical Service Code : Original TextST
ABS-02.10.00 - Transfer Medical Service Code : Second Alternate IdentifierST
ABS-02.11.00 - Transfer Medical Service Code : Second Alternate TextST
ABS-02.12.00 - Transfer Medical Service Code : Name of Second Alternate Coding SystemID
ABS-02.13.00 - Transfer Medical Service Code : Second Alternate Coding System Version IDST
ABS-02.14.00 - Transfer Medical Service Code : Coding System OIDST
ABS-02.15.00 - Transfer Medical Service Code : Value Set OIDST
ABS-02.16.00 - Transfer Medical Service Code : Value Set Version IDDTM
ABS-02.17.00 - Transfer Medical Service Code : Alternate Coding System OIDST
ABS-02.18.00 - Transfer Medical Service Code : Alternate Value Set OIDST
ABS-02.19.00 - Transfer Medical Service Code : Alternate Value Set Version IDDTM
ABS-02.20.00 - Transfer Medical Service Code : Second Alternate Coding System OIDST
ABS-02.21.00 - Transfer Medical Service Code : Second Alternate Value Set OIDST
ABS-02.22.00 - Transfer Medical Service Code : Second Alternate Value Set Version IDDTM
ABS-03.00.00 - Severity of Illness CodeCWE
ABS-03.01.00 - Severity of Illness Code : IdentifierST
ABS-03.02.00 - Severity of Illness Code : TextST
ABS-03.03.00 - Severity of Illness Code : Name of Coding SystemID
ABS-03.04.00 - Severity of Illness Code : Alternate IdentifierST
ABS-03.05.00 - Severity of Illness Code : Alternate TextST
ABS-03.06.00 - Severity of Illness Code : Name of Alternate Coding SystemID
ABS-03.07.00 - Severity of Illness Code : Coding System Version IDST
ABS-03.08.00 - Severity of Illness Code : Alternate Coding System Version IDST
ABS-03.09.00 - Severity of Illness Code : Original TextST
ABS-03.10.00 - Severity of Illness Code : Second Alternate IdentifierST
ABS-03.11.00 - Severity of Illness Code : Second Alternate TextST
ABS-03.12.00 - Severity of Illness Code : Name of Second Alternate Coding SystemID
ABS-03.13.00 - Severity of Illness Code : Second Alternate Coding System Version IDST
ABS-03.14.00 - Severity of Illness Code : Coding System OIDST
ABS-03.15.00 - Severity of Illness Code : Value Set OIDST
ABS-03.16.00 - Severity of Illness Code : Value Set Version IDDTM
ABS-03.17.00 - Severity of Illness Code : Alternate Coding System OIDST
ABS-03.18.00 - Severity of Illness Code : Alternate Value Set OIDST
ABS-03.19.00 - Severity of Illness Code : Alternate Value Set Version IDDTM
ABS-03.20.00 - Severity of Illness Code : Second Alternate Coding System OIDST
ABS-03.21.00 - Severity of Illness Code : Second Alternate Value Set OIDST
ABS-03.22.00 - Severity of Illness Code : Second Alternate Value Set Version IDDTM
ABS-04.00.00 - Date/Time of AttestationDTM
ABS-05.00.00 - Attested ByXCN
ABS-05.01.00 - Attested By : Person IdentifierST
ABS-05.02.00 - Attested By : Family NameFN
ABS-01.02.01 - Attested By : Family Name : SurnameThe atomic element of the person's family name. In most Western usage, this is the person's last name.ST
ABS-01.02.02 - Attested By : Family Name : Own Surname PrefixInternationalization usage for Germanic languages. This component is optional. An example of a <surname prefix> is the "van" in "Ludwig van Beethoven". Since the <surname prefix> doesn't sort completely alphabetically, it is reasonable to specify it as a separate sub-component of the PN and extended PN data types (XPN and XCN).ST
ABS-01.02.03 - Attested By : Family Name : Own SurnameInternationalization usage for Germanic languages. This component is optional. An example of a <surname prefix> is the "van" in "Ludwig van Beethoven". Since the <surname prefix> doesn't sort completely alphabetically, it is reasonable to specify it as a separate sub-component of the PN and extended PN data types (XPN and XCN).ST
ABS-01.02.04 - Attested By : Family Name : Surname Prefix from Partner/SpouseInternationalization usage for Germanic languages. This component is optional. An example of a <surname prefix> is the "van" in "Ludwig van Beethoven". Since the <surname prefix> doesn't sort completely alphabetically, it is reasonable to specify it as a separate sub-component of the PN and extended PN data types (XPN and XCN).ST
ABS-01.02.05 - Attested By : Family Name : Surname from Partner/SpouseThe portion of the person's surname (in most Western usage, the last name) that is derived from the surname of the person's partner or spouse, as distinguished from the part derived from the person's own surname. This component is optional. If no portion of the person's surname is derived from the surname of the person's partner or spouse, this component is not valued. Otherwise, if the surname of the partner or spouse has legally changed to become (or incorporate) the person's surname, this is the surname of the partner or spouse immediately prior to such change. ST
ABS-05.03.00 - Attested By : Given NameST
ABS-05.04.00 - Attested By : Second and Further Given Names or Initials ThereofST
ABS-05.05.00 - Attested By : Suffix (e.g., JR or III)ST
ABS-05.06.00 - Attested By : Prefix (e.g., DR)ST
ABS-05.07.00 - Attested By : Degree (e.g., MD)IS
ABS-05.08.00 - Attested By : Source TableCWE
ABS-05.08.01 - Attested By : Source Table : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-05.08.02 - Attested By : Source Table : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-05.08.03 - Attested By : Source Table : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-05.08.04 - Attested By : Source Table : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-05.08.05 - Attested By : Source Table : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-05.08.06 - Attested By : Source Table : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-05.08.07 - Attested By : Source Table : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-05.08.08 - Attested By : Source Table : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-05.08.09 - Attested By : Source Table : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-05.08.10 - Attested By : Source Table : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-05.08.11 - Attested By : Source Table : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-05.08.12 - Attested By : Source Table : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-05.08.13 - Attested By : Source Table : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-05.08.14 - Attested By : Source Table : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-05.08.15 - Attested By : Source Table : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.08.16 - Attested By : Source Table : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-05.08.17 - Attested By : Source Table : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-05.08.18 - Attested By : Source Table : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.08.19 - Attested By : Source Table : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-05.08.20 - Attested By : Source Table : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-05.08.21 - Attested By : Source Table : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.08.22 - Attested By : Source Table : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-05.09.00 - Attested By : Assigning AuthorityHD
ABS-05.10.00 - Attested By : Name Type CodeID
ABS-05.11.00 - Attested By : Identifier Check DigitST
ABS-05.12.00 - Attested By : Check Digit SchemeID
ABS-05.13.00 - Attested By : Identifier Type CodeID
ABS-05.14.00 - Attested By : Assigning FacilityHD
ABS-05.15.00 - Attested By : Name Representation CodeID
ABS-05.16.00 - Attested By : Name ContextCWE
ABS-05.16.01 - Attested By : Name Context : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-05.16.02 - Attested By : Name Context : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-05.16.03 - Attested By : Name Context : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-05.16.04 - Attested By : Name Context : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-05.16.05 - Attested By : Name Context : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-05.16.06 - Attested By : Name Context : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-05.16.07 - Attested By : Name Context : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-05.16.08 - Attested By : Name Context : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-05.16.09 - Attested By : Name Context : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-05.16.10 - Attested By : Name Context : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-05.16.11 - Attested By : Name Context : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-05.16.12 - Attested By : Name Context : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-05.16.13 - Attested By : Name Context : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-05.16.14 - Attested By : Name Context : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-05.16.15 - Attested By : Name Context : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.16.16 - Attested By : Name Context : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-05.16.17 - Attested By : Name Context : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-05.16.18 - Attested By : Name Context : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.16.19 - Attested By : Name Context : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-05.16.20 - Attested By : Name Context : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-05.16.21 - Attested By : Name Context : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.16.22 - Attested By : Name Context : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-05.17.00 - Attested By : Name Validity RangeDR
ABS-05.18.00 - Attested By : Name Assembly OrderID
ABS-05.19.00 - Attested By : Effective DateDTM
ABS-05.20.00 - Attested By : Expiration DateDTM
ABS-05.21.00 - Attested By : Professional SuffixST
ABS-05.22.00 - Attested By : Assigning JurisdictionCWE
ABS-01.08.01 - Discharge Care Provider : Source Table : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.08.02 - Discharge Care Provider : Source Table : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.08.03 - Discharge Care Provider : Source Table : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.08.04 - Discharge Care Provider : Source Table : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-01.08.05 - Discharge Care Provider : Source Table : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-01.08.06 - Discharge Care Provider : Source Table : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-01.08.07 - Discharge Care Provider : Source Table : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-01.08.08 - Discharge Care Provider : Source Table : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-01.08.09 - Discharge Care Provider : Source Table : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-01.08.10 - Discharge Care Provider : Source Table : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-01.08.11 - Discharge Care Provider : Source Table : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-01.08.12 - Discharge Care Provider : Source Table : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-01.08.13 - Discharge Care Provider : Source Table : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-01.08.14 - Discharge Care Provider : Source Table : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-01.08.15 - Discharge Care Provider : Source Table : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.08.16 - Discharge Care Provider : Source Table : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-01.08.17 - Discharge Care Provider : Source Table : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-01.08.18 - Discharge Care Provider : Source Table : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.08.19 - Discharge Care Provider : Source Table : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-01.08.20 - Discharge Care Provider : Source Table : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-01.08.21 - Discharge Care Provider : Source Table : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-01.08.22 - Discharge Care Provider : Source Table : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-05.23.00 - Attested By : Assigning Agency or DepartmentCWE
ABS-05.23.01 - Attested By : Assigning Agency or Department : IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-05.23.02 - Attested By : Assigning Agency or Department : TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-05.23.03 - Attested By : Assigning Agency or Department : Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-05.23.04 - Attested By : Assigning Agency or Department : Alternate IdentifierSequence of characters (the code) that uniquely identifies the item being referenced by the <text>. Differ-ent coding schemes will have different elements here.ST
ABS-05.23.05 - Attested By : Assigning Agency or Department : Alternate TextName or description of the item in question. E.g., myocardial infarction or X-ray impression. Its data type is string (ST).ST
ABS-05.23.06 - Attested By : Assigning Agency or Department : Alternate Name of Coding SystemEach coding system is assigned a unique identifier. This component will serve to identify the coding scheme being used in the identifier component. The combination of the identifier and name of coding system components will be a unique code for a data item. ST
ABS-05.23.07 - Attested By : Assigning Agency or Department : Coding System Version IDThis component carries the version for the coding system identified by components 1-3. If CWE.3 is populated with a value other than HL7nnnn or is of table type user-defined, version ID must be valued with an actual version ID. If CWE.3 is populated with a value of HL7nnnn and nnnn is of table type HL7, version ID may have an actual value or it may be absent. If version ID is absent, it will be interpreted to have the same value as the HL7 version number in the message header. ST
ABS-05.23.08 - Attested By : Assigning Agency or Department : Alternate Coding System Version IDThis component carries the version for the coding system identified by components 4-6. Analogous To CWE.7 - Coding System Version ID.ST
ABS-05.23.09 - Attested By : Assigning Agency or Department : Original TextThe text as seen and/or selected by the user who entered the data. Original text can be used in a structured user interface to capture what the user saw as a representation of the code on the data input screen, or in a situation where the user dictates or directly enters text, it is the text entered or uttered by the user. In a situation where the code is assigned sometime after the text was entered, original text is the text or phrase used as the basis for assigning the code.ST
ABS-05.23.10 - Attested By : Assigning Agency or Department : Second Alternate IdentifierA sequence of characters that uniquely identifies a second alternate code. Analogous to CWE.1- Identifier. ST
ABS-05.23.11 - Attested By : Assigning Agency or Department : Second Alternate TextThe descriptive or textual name of the alternate identifier. Analogous to CWE.2 - Text. See usage note in section introduction.ST
ABS-05.23.12 - Attested By : Assigning Agency or Department : Name of Second Alternate Coding SystemIdentifies the coding scheme being used in the alternate identifier component. Analogous to CWE.3 Name of Coding System. See usage note in section introduction. As of v2.7 this component is required when CWE.10 is populated and CWE.20 is not populated. Both CWE.6 and CWE.17 may be populated. Receivers should not identify a code based on its position within the tuples (Identifier, Alternate Identifier, or Second Alternate Identifier) or position within a repeating field. Instead, the receiver should always examine the coding System as specified in CWE.12 and/or CWE.20, the "Coding System" component or the "Coding System OID", for the tuple. ID
ABS-05.23.13 - Attested By : Assigning Agency or Department : Second Alternate Coding System Version IDThis component carries the version for the coding system identified by components 10-12. Analogous to CWE.7 - Coding System Version ID.ST
ABS-05.23.14 - Attested By : Assigning Agency or Department : Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.3. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.1 is populated and CWE.3 is not populated. Both CWE.3 and CWE.14 may be populated. ST
ABS-05.23.15 - Attested By : Assigning Agency or Department : Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.1 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.23.16 - Attested By : Assigning Agency or Department : Value Set Version IDThis component carries the version for the value set identified by CWE.15. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.15 is populated. DTM
ABS-05.23.17 - Attested By : Assigning Agency or Department : Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.6. Analogous to CWE.14 Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.4 is populated and CWE.6 is not populated. Both CWE.6 and CWE.17 may be populated. ST
ABS-05.23.18 - Attested By : Assigning Agency or Department : Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.4 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.23.19 - Attested By : Assigning Agency or Department : Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.18. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.18 is populated. DTM
ABS-05.23.20 - Attested By : Assigning Agency or Department : Second Alternate Coding System OIDThis component contains the ISO Object Identifier (OID) for the coding system or value set named in CWE.12. Analogous to CWE.14 - Coding System OID. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined code systems the OID registered in the HL7 OID registry SHALL be used. This component is required when CWE.10 is populated and CWE.12 is not populated. Both CWE.12 and CWE.20 may be populated. ST
ABS-05.23.21 - Attested By : Assigning Agency or Department : Second Alternate Value Set OIDThis component contains the ISO Object Identifier (OID) to allow identification of the value set from which the value in CWE.10 is obtained. The value for this component is 2.16.840.1.113883.12.#### where "####" is to be replaced by the HL7 table number in the case of an HL7 defined or user defined table. For externally defined value sets, the OID registered in the HL7 OID registry SHALL be used. A value set may or need not be present irrespective of other fields. Note that if a code is provided, the meaning of the code must come from the definition of the code in the code system. The meaning of the code SHALL NOT depend on the value set. Applications SHALL NOT be required to interpret the code in light of the valueSet, and they SHALL NOT reject an instance because of the presence or absence of any or a particular value set/ value set version ID. ST
ABS-05.23.22 - Attested By : Assigning Agency or Department : Second Alternate Value Set Version IDThis component carries the version for the value set identified by CWE.21. The version is a date. The date is the date/time that the value set being used was published. Value set version ID is required if CWE.21 is populated. DTM
ABS-05.24.00 - Attested By : Security CheckST
ABS-05.25.00 - Attested By : Security Check SchemeID