Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 37 Next »

Health Level Seven International® invites you to take part in the formation of consensus groups for balloting HL7 candidate standards and documents for the upcoming May 2019 ballot cycle. The candidate standards and other documents described in this announcement are expected to ballot prior to HL7's May 2019 Working Group Meeting (WGM). Comments received from consensus group members will be addressed at that WGM running May 4-10, 2019 in Montreal (Quebec), Canada.

Consensus Group Sign-Up Open Date: Monday, February 25, 2019

Consensus Group Sign-Up Close Date: Thursday, March 28, 2019

Important Note: Consensus group signup closes when ballot voting begins. 

Consensus group enrollment will be available from a date at least four weeks preceding the ballot vote opening date and will continue until the opening of voting.  While the exact dates are dependent upon individual ballot open and close dates, in general the consensus group signup period dates are as follows:

Ballot Open Date: Friday, March 29, 2019

Ballot Close Date: Monday, April 29, 2019

Exceptions for a specific ballot are listed with that ballot description. 

Please be aware that these dates may not be accurate for all consensus groups.  To sign up, point your browser to the Ballot Desktop.  Important Note:  Consensus group signup will close when ballot voting begins.  This is also the final date non-members can sign up for Non-Member Participation in the ballot.

Ballot Listing

This section details the candidate/draft standards and other documents for this ballot cycle.  Please note that the following details about specific items are subject to review by the HL7 Technical Steering Committee:

  • Approval of all projects initiating any ballot item
  • Approval of titles for new candidate and draft standards and other documents
  • Approval of new candidate Standards for Trial Use
  • Approval of ballot level for those items moving to Normative ballot

Any changes from the initial details in this announcement will be identified in the ballot announcement document released when this ballot cycle opens.


Currently known changes are available in the Update to Ballot Announcement for May 2019 Ballot Cycle

Space Index

Total number of pages: 65

0-9 ... 12 A ... 3 B ... 5 C ... 5 D ... 2 E ... 2
F ... 1 G ... 0 H ... 18 I ... 1 J ... 2 K ... 0
L ... 0 M ... 1 N ... 0 O ... 0 P ... 2 Q ... 0
R ... 1 S ... 3 T ... 0 U ... 2 V ... 0 W ... 3
X ... 0 Y ... 0 Z ... 2 !@#$ ... 0    

0-9

Page: 2019JAN
Formation of Consensus Groups for early 2019 January Ballot Cycle (pdf, 473.1 kb) http://www.hl7.org/documentcenter/public/ballots/2019JAN/Announcements/Formation%20of%20Consensus%20Groups%20for%20early%202019%20January%20Ballot%20Cycle.pdf 2019 January F
Page: 2019JAN Announcement of Formation of Consensus Groups
Health Level Seven International® invites you to take part in the formation of consensus groups for balloting HL7 candidate standards and documents for the upcoming January 2019 ballot cycle. The candidate standards and other documents described in this a
Page: 2019MAY
Announcement of Formation of Consensus Groups (PDF) http://www.hl7.org/documentcenter/public/ballots/2019MAY/Announcements/2019MAY%20Announcement%20of%20Formation%20of%20Consensus%20Groups.pdf Announcement of Ballot Openings for 2019MAY (PDF) http://www.h
Page: 2019MAY Announcement of Formation of Consensus Groups
Health Level Seven International® invites you to take part in the formation of consensus groups for balloting HL7 candidate standards and documents for the upcoming May 2019 ballot cycle. The candidate standards and other documents described in this annou
Page: 2019SEP
Page: 2019SEP Announcement of Formation of Consensus Groups
Health Level Seven International® invites you to take part in the formation of consensus groups for balloting HL7 candidate standards and documents for the upcoming September 2019 ballot cycle. The candidate standards and other documents described in this
Page: 2020FEB
Page: 2020FEB Announcement of Formation of Consensus Groups
HL7_International.png November 25, 2019 Health Level Seven International® invites you to take part in the formation of consensus
Page: 2020MAY
Page: 2020MAY Announcement of Formation of Consensus Groups
HL7_International.png March 9, 2020 Health Level Seven International® invites you to take part in the formation of consensus group
Page: 2020SEP
Page: 2020SEP Announcement of Formation of Consensus Groups
HL7_International.png July 13, 2020 Health Level Seven International® invites you to take part in the formation of consensus group

A

Page: Administering Specification Feedback Projects
This page supplements the base Specification Feedback https://confluence.hl7.org/display/HL7/Specification+Feedback page by providing guidance to HL7 participants who have the authority to administer Specification Feedback issues. Administraters have a fe
Page: All HL7 Calendars
https://calendar.google.com/calendar/embed?src=65v4t4t60cltcts680gjtk1g10%40group.calendar.google.com&ctz=America%2FNew_York https://calendar.google.com/calendar/embed?src=pqei3eoc3l70hmkn63k5qfrko8%40group.calendar.google.com&ctz=America%2FNew_Yo
Page: ANSI Standards approaching expiration
select standardname as Standard_Name, designation, dateapproved as Date_Approved, DATEADD(YEAR, 5, dateapproved) as Expiration_Date, description from hl72.dbo.standards_ansiApproved where dateapproved > DATEADD(YEAR, -5.5, GETDATE()) --GETDATE() and datea

B

Page: Ballot Announcements
Health Level Seven International® invites you to review the relevant announcements regarding balloting HL7 candidate standards and documents. HL7 Ballot Desktop https://hl7.org/permalink/?BallotDesktop HL7 Calendars https://confluence.hl7.org/display/HL7/
Page: Ballot Content
https://calendar.google.com/calendar/embed?src=65v4t4t60cltcts680gjtk1g10%40group.calendar.google.com&ctz=America%2FNew_York
Page: Ballot Procedures and Guidelines
General Guidelines The membership is reminded that ANSI rules dictate that all individuals who were in a normative consensus group MUST be included in the initial consensus group when the same document goes out for a subsequent normative ballot. Thus, if
Page: Ballot Voting
https://calendar.google.com/calendar/embed?src=65v4t4t60cltcts680gjtk1g10%40group.calendar.google.com&ctz=America%2FNew_York https://calendar.google.com/calendar/embed?src=pqei3eoc3l70hmkn63k5qfrko8%40group.calendar.google.com&ctz=America%2FNew_Yo
Page: Balloting Help
Help ISSUE – Consensus Groups Listing Not Displayed: If you navigate to the Ballot Desktop and it does not correctly display the listing of consensus groups you have previously signed up for, please click the "January 2019 Ballot Cycle" link in the left-

C

Page: Changes from gForge
This page lists differences between the old FHIR gForge tracker mechanism for managing specification feedback and ballot submissions and the new Jira tool. Real Submitter is now gone. Jira automatically captures the reporter and in Jira all issues will b
Page: Co-Chair WG Health and Elections dates
Page: Configuring Specification Feedback
Co-chairs and project leads have responsibility for ensuring that the Jira Specification Feedback Project configuration information is kept up-to-date as the underlying specifications evolve. Overview This page describes how to manage the process of conf
Page: Confluence and JIRA Information Updates
This page will be used to post CTO and project team updates related to the implementation of Confluence and Jira Collaboration software at HL7. July 2020 CTO Tooling Update Yikes! Mid-summer already and once again your friendly CTO has dropped the ball o
Page: Coordinating Ballot Submissions
Voting rights in HL7 exist for individuals, HL7 organizational members and HL7 affiliates. Individual voting is straight-forward. Each individual member is responsible for registering themselves and then for submitting their votes, reviewing the disposi

D

Page: Da Vinci 2021 Use Cases- Year 4
Instructions for the template: 1. Insert page title above. 2. Click Publish to create your page. 3. Click Edit on top to update your program plan. 4. Click on the Roadmap Planner macro and update. Use of Template: 1. Annually, provide a high level progr
Page: Dental Health Functional Profile
1. Enter a title in the Page Title field above 2. Click the 'Publish' button in the lower right corner of the page; the Publication Request form will appear

E

Page: Early 2019SEP Announcement of Formation of Consensus Groups
Health Level Seven International® invites you to take part in the early formation of consensus groups for balloting HL7 candidate standards and documents prior to the upcoming September 2019 ballot cycle. The candidate standards and other documents descri
Page: Early 2020FEB Announcement of Formation of Consensus Groups
Health Level Seven International® invites you to take part in the early formation of consensus groups for balloting HL7 candidate standards and documents prior to the upcoming February 2020 ballot cycle. The candidate standards and other documents describ

F

Page: FHIR Specification Feedback
This page supplements the Specification Feedback page with information that is unique to the FHIR Specification Feedback Jira project. Be sure to read the base page first. Location Elements There are four fields that can be used to help identify the loca

G

H

Page: HL7 Acceptable Use Policy
Introduction The HL7 Confluence Website is a community edited site for Health Level Seven International. This Acceptable Use Policy (AUP) applies to all HL7-branded Confluence sites and is intended to aid any and all HL7 Confluence and JIRA users (registe
Page: HL7 Announcement of Additional Ballot Openings for 2020MAY Ballot Cycle
HL7_International.png April 20, 2020 Health Level Seven International® invites you to take part in the late ballot openings for balloting HL7 candidate standards and documents for the May 2020 ballot cycle. The candidate standards and other documents des
Page: HL7 Announcement of Ballot Openings for (regular) 2019SEP Ballot Cycle
HL7_International.png Health Level Seven International® invites you to take part in the regular cycle ballot openings for balloting HL7 candidate standards and documents for the September 2019 ballot cycle. The candidate standards and other documents des
Page: HL7 Announcement of Ballot Openings for (regular) 2020FEB Ballot Cycle
HL7_International.png December 27, 2019 Health Level Seven International® invites you to take part in the regular cycle ballot openings for balloting HL7 candidate standards and documents for the February 2020 ballot cycle. The candidate standards and ot
Page: HL7 Announcement of Ballot Openings for 2019 January Ballot Cycle
Health Level Seven International® invites you to take part in the ballot openings for balloting HL7 candidate standards and documents for the upcoming September 2018 ballot cycle. The candidate standards and other documents described in this announcement
Page: HL7 Announcement of Ballot Openings for 2019 May Ballot Cycle
HL7_International.png March 29, 2019 Health Level Seven International® invites you to take part in the ballot openings for balloting HL7 candidate standards and documents for the upcoming May 2019 ballot cycle. The candidate standards and other documents
Page: HL7 Announcement of Ballot Openings for 2020MAY Ballot Cycle
HL7_International.png April 10, 2020 Health Level Seven International® invites you to take part in the regular cycle ballot openings for balloting HL7 candidate standards and documents for the May 2020 ballot cycle. The candidate standards and other docu
Page: HL7 Announcement of Early Ballot Openings for 2019 September Ballot Cycle
HL7_International.png June 21, 2019 Health Level Seven International® invites you to take part in the early ballot openings for balloting HL7 candidate standards and documents for the upcoming September 2019 ballot cycle. The candidate standards and othe
Page: HL7 Announcement of Early Ballot Openings for 2020 February Ballot Cycle
HL7_International.png October 25, 2019 Health Level Seven International® invites you to take part in the early ballot openings for balloting HL7 candidate standards and documents for the upcoming February 2020 ballot cycle. The candidate standards and ot
Page: HL7 Ballot Desktop
todo
Page: HL7 Balloting
Balloting is the formal process that HL7 uses to vet specifications prior to publication. Rules governing balloting are defined in both HL7's Governance and Operations Manual http://www.hl7.org/documentcenter/public./membership/HL7_Governance_and_Operati
Page: HL7 Calendars
The HL7 calendars page provides a one-page view of the high level HL7 deadlines for the current month; please use the navigation to move forward and backward by month. The calendar includes the Working Group Meeting dates, the Ballot dates, ballot content
Page: HL7 FHIR-specific dates
Page: HL7 Leadership Announcements
This page is designed to be a source of truth for all HL7 Leadership (co-chairs) announcements! Announcement Date Comments The second UTG session geared towards the HL7 community can be found at the links below: HL7 Education on Demand (free access): http
Page: HL7 Tools and Processes
This page provides a summary of tools and processes used by HL7 FHIR Implementation Guide Process Flow HL7 Balloting https://confluence.hl7.org/display/HL7/HL7+Balloting Process for Importing Ballot Spreadsheets to gForge https://confluence.hl7.org/displa
Page: HL7 Work Groups & Projects
Work groups are the bodies within HL7 that take on responsibility for developing and maintaining standards. They are where the "work" of HL7 gets done. HL7 has a large number of work groups covering the spectrum of the healthcare space. All work groups
Page: HL7/Zoom FAQs
Where do I go to find Zoom support? Visit support.zoom.us http://support.zoom.us to find popular topics about Zoom features, training, and support, including great training videos https://support.zoom.us/hc/en-us/articles/206618765-Zoom-Video-Tutorials, i
Page: How to Create and Review a Project Proposal
How to Create Project Proposals How to Edit Project Proposals How to Comment on Project Proposals Process Overview The Project Proposal process begins with the creation of a Project Proposal. The project proponent, may be a Sponsoring Work Group or a pro

I

Page: Importing ballot results from spreadsheets
The new Jira tooling does support importing ballot results from spreadsheets. In the near term, this is limited to HL7 participants with 'Manager' access - generally co-chairs or facilitators responsible for conducting the ballot. The intention is for b

J

Page: Jira Ballot Administrative Processes
This page describes the steps taken by the Ballot Coordinator in managing the balloting process. Everyone is free to read this page, but many of the capabilities described here will only be available to the Ballot Coordinator. Ballot Registration TODO -
Page: Jira Ballot Process
The Jira Ballot process is "under development" and does not yet represent an official HL7 process. It will be trialed with selected specifications in an upcoming ballot and, depending on feedback, should eventually be rolled out across all HL7 specificati

K

L

M

Page: Managing Specification Feedback
This page supplements the base Specification Feedback page by providing guidance to HL7 participants who have the authority to manage feedback issues. That includes all users who have been added to the "hl7-trusted-users" group, which includes co-chairs,

N

O

P

Page: Participating in HL7
This page provides a quick over view of who and what HL7 International is and how to participate. Who we are HL7 International is officially constituted as a standards development body under the American National Standards Institute (ANSI). While ANSI is
Page: Process for Importing Ballot Spreadsheets to gForge
Ensure gForge has an entry in the "ballot" and "specification" fields for the specification. If not, have the gForge manager add them. Download the spreadsheets for the ballot Check each spreadsheet to verify that appropriate contact information includin

Q

R

Page: Reconciliation spreadsheets
Part of the ballot process for HL7 is to upload a reconciliation spreadsheet to the HL7 ballot desktop once reconciliation is complete. The steps to do this in Jira are as follows: Perform a search where Project = Ballot Definition and find the particula

S

Page: Shared Zoom Account Check-Out/Reservation
How to Reserve a Shared HL7 Zoom Account Insure you have a Confluence account and have logged in to enable editing of the table below. To request a Confluence account, email Webmaster@HL7.org mailto:Webmaster@HL7.org Review the table below for availabil
Page: Specification Feedback
How to Bulk Edit-HL7 JIRA https://www.youtube.com/watch?v=3xra3ibhZHg&list=PL4DUfomz2RZwqt51oQ6oQUMYhUAqHJsse&index=1 How to Comment-HL7 JIRA https://www.youtube.com/watch?v=U7zhTIWQWrA&list=PL4DUfomz2RZwqt51oQ6oQUMYhUAqHJsse&index=2 How To Create An Issu
Page: STUs Expiring in Next 6 Months
SELECT ('<a href="https://www.hl7.org/dstucomments/showdetail.cfm?dstuid=' + convert(varchar,dstu_documents.dstu_document_id) + '">' + dstu_documents.dstu_document_shortname + '</a>') as STU_Name, dstu_documents.dstu_document_code as STU_Code, Begin_Dt =

T

U

Page: Understanding the Standards Process
Understanding the standards process The standards process at HL7 (and in other standards development organizations) can seem complex, bureaucratic and unnecessarily time-consuming. There are absolutely areas about the process that can and should be impro
Page: Updates to Ballot Announcements for January 2019 Ballot Cycle
Health Level Seven International® thanks you for your participation in the January 2019 Ballot cycle and wants to make you aware of the following important update(s) as described below: Items Withdrawn from Balloting The item titled "HL7 Domain Analysis

V

W

Home page: Welcome to the Confluence Pages of Health Level 7 (HL7) International
Check out the HL7 Terminology Overview https://www.youtube.com/watch?v=vmZ71_cgYhI! https://confluence.hl7.org/display/PSS/Pilot+Participants+v2 Check out the COVID-19 Response Blog https://confluence.hl7.org/display/CR/COVID-19+Response+Home Co-Chair Han
Page: WGM Registration
Page: Withdrawal of a specification or project
This document outlines the process for withdrawing all types of HL7 projects and specifications and should be submitted with the withdrawal PSS, or alone if a PSS is not required. You can also use the Create... dialog to create the withdrawal form from th

X

Y

Z

Page: Zoom
Page: Zoom Tip Sheet
Visit support.zoom.us http://support.zoom.us to find popular topics about Zoom features, training, and support, including great training videos https://support.zoom.us/hc/en-us/articles/206618765-Zoom-Video-Tutorials. We've also created a page for HL7-spe

!@#$

Current Ballots


Work GroupProject IDBallot NameFamilyBallot IterationBallot DescriptionLast BallotedUnique Ballot IDPool enrollment opensPool enrollment closes
Anesthesia1153HL7 Domain Analysis Model: Intra-Procedure Anesthesia, Release 1HL7 1st Informative BallotThe Anesthesia (intra-procedure) Domain Analysis Model will focus on the intra-procedure anesthetic process and its documentation in the anesthetic record. The goal of this project is to support the exchange and understanding of anesthesiology data by establishing:

• A structural outline of the anesthetic record
• Detailed models of significant components of intra-procedural anesthesia
• Standard terms and definitions for common anesthesiology data elements

Since the last ballot of this material in 2020MAY , the following changes have been made: None/not-applicableHL7_DAM_ANESTH_R1_I1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Biomedical Research and Regulation1424HL7 FHIR® Implementation Guide: Common Data Model Harmonization for Research (CDMH), Release 1 - US RealmFHIR 1st STU BallotFrom a standards perspective, the project will specifically perform the following
• Create and update FHIR profiles which can be used to represent the data that is being accessed by the researchers.
• Update the DAF-Research IG which has already created some of these profiles.
• Update the Data Extraction and transformation processes within DAF-Research to use the various profiles.
Since the last ballot of this material in 2019MAY , the following changes have been made: New ballotFHIR_IG_CDMH_R1_D1_2019MAY 2019/02/252019/03/28
Biomedical Research and Regulation1426HL7 FHIR® Implementation Guide: Women’s Health Technology Coordinated Registry Network (CRN), Release 1 - US RealmFHIR 1st STU Ballot From a standards perspective, the project will outline the mechanisms that can be used to capture and exchange common or core data elements related to women’s health collected as part of the clinical care delivery eco-system. Specifically, the project will examine how to use FHIR Resources and IG’s to facilitate collection and exchange of data elements related to women’s health.Since the last ballot of this material in 2019MAY , the following changes have been made: No substantive changes.FHIR_IG_WHT_CRN_R1_D1_2019MAY 2019/02/252019/03/28
Biomedical Research and Regulation1503HL7 Domain Analysis Model: Biomedical Research Integrated Domain Group, Release 5.3HL7 1st Informative BallotTo ballot a new version of the BRIDG model that supports the additional semantics in support of NCI, DICOM and the National Biomedical Imaging Archive, the update of SDTM 3.1.3 to SDTM 3.2 and additional diagrams and reorganization changes to make BRIDG more accessible and easily navigated.Since the last ballot of this material in 2019MAY , the following changes have been made: The newest version of the BRIDG model, release 5.3, adds support for NCI’s National Biomedical Imaging archive (NBIA ), CDISC’s Study Data Tabulation Model Implementation Guide (SDTMIG) v3.2, and a few new diagrams and assorted updates.
For NBIA, BRIDG is adding only one new model element. BRIDG already has a wide range of the concepts needed in support of imaging and these were leveraged for the vast majority of NBIA concepts. A new diagram also shows those concepts used in that harmonization effort.
For the CDISC SDTMIG v3.2 harmonization, little more than twenty model changes impact only about ten classes and many are due to the addition of new domains and variables added by CDISC to this version of SDTM. Again, the vast majority of semantics needed to support SDTM already exist in BRIDG. Several new diagrams are added to be able to view those concepts more easily.
This version of BRIDG makes a few structural changes, such as eliminating sub-domain packages and adding more diagrams, to make concepts in the model easier to search for and find. Also included are a few updates and corrections to previously added model elements.

HL7_DAM_BRIDG_R5.3_I1_2019MAY 2019/02/252019/03/28
Clinical Decision Support1493HL7 FHIR® Implementation Guide: Documentation Templates and Payer Rules (DTR), Release 1- US RealmFHIR 1st STU BallotThis implementation guide will provide use cases, patterns, profiles, and extensions needed to support documentation requirements and rules for specific treatments and services to allow health systems and providers to ensure services are covered and/or medically appropriate.Since the last ballot of this material in 2019SEP , the following changes have been made: This is the initial draft for comment of the implementation guide, which contains a complete description of the use cases and accompanying profiles and extensions.FHIR_IG_DTR_R1_O1_2019MAY 2019/02/252019/03/28
Clinical Decision Support1108HL7 Cross-Paradigm Specification: Clinical Quality Language, Release 1HL7 1th Normative BallotThe Clinical Quality Language Specification defines a representation for the expression of clinical knowledge that can be used within both the Clinical Decision Support (CDS) and Clinical Quality Measurement (CQM) domains. The specification defines both a high-level, clinically focused syntax for human-readable logic, as well as an equivalent canonical, machine-readable representation focused on sharing, translation, and evaluation of the logic. Since the last ballot of this material in 2020MAY , the following changes have been made: In addition to numerous clarifications and errata throughout, this update includes:
1) Improved semantics for collapse and expand (including precision-based decimal predecessor and successor, as well as a count function for intervals)
2) FHIRPath alignment (including removing timezone offset from the Time type, and changing DateTime to use a Decimal for the seconds component, rather than considering milliseconds a separate precision)
3) Support for non-patient contexts (and change "Population" context to "Unspecified")
4) Support for namespacing CQL libraries
5) Support for unit conversions
HL7_CQLANG_R1_D4_2019MAY 2019/02/252019/03/28
Clinical Interoperability Council1363HL7 FHIR® Implementation Guide: Breast Cancer Data, Release 1- US RealmFHIR 3rd STU BallotCIMI Logical Models and FHIR Profiles for Breast-Cancer focused Radiology in collaboration with RSNA and ACR.Since the last ballot of this material in 2020MAY , the following changes have been made: This will be the first ballot of this material 'for comment' with subsequent ballots to target Informative and STU by January 2020. FHIR_IG_BRCANCER_R1_O3_2019MAY_WITHDRAWN 2019/02/252019/03/28
Clinical Interoperability Council1494HL7 FHIR® Implementation Guide: Health Record Exchange (HRex) Framework, Release 1- US RealmFHIR 1st STU BallotThe scope of the HRex Framework project is to define combinations of exchange methods, specific payloads, search criteria, conformance, provenance, and other relevant requirements to support specific exchanges of clinical information between: 1) providers, 2) a provider and a payer, 3) a payer and providers, and/or a provider and any third party involved in value based care.Since the last ballot of this material in 2019SEP , the following changes have been made: N/AHL7_FHIR_IG_HRex_2019MAY_WITHDRAWN 2019/02/252019/03/28
Clinical Quality Information1499HL7 FHIR® Implementation Guide: Quality Measures, Release 1- US Realm

Requesting alternate ballot title "FHIR Quality Measure IG"
FHIR 1st STU BallotFHIR Clinical Reasoning provides infrastructure requirements for representing a health quality measure as an electronic format. A quality measure is a quantitative tool to assess the performance of an individual or organization’s performance in relation to a specified process or outcome via the measurement of an action, process, or outcome of clinical care.Since the last ballot of this material in 2020FEB , the following changes have been made: This implementation guide (IG) provides specific guidance to eCQM developers and implementers to assure consistency for applying CQL expressions using any data model, enhancing ability to share eCQM artifacts for direct implementation and calculation. The IG will provide examples using the US Realm FHIR QICore data model but it will not restrict usage of any data model. FHIR_IG_QM_R1_D1_2019MAY 2019/02/252019/03/28
Clinical Quality Information1429HL7 FHIR® Implementation Guide: Data Exchange for Quality Measures, Release 1 - US RealmFHIR 2nd STU BallotThis Implementation Guide defines common data exchange patterns usable for a broad range of value-based health care use cases, including quality measurement and reporting, and public health care reporting.Since the last ballot of this material in 2020FEB , the following changes have been made: This ballot version includes numerous changes in support of reconciliation efforts with comment submitters, as well as the inclusion of use cases to support more general quality measurement and public health reporting use cases. Substantive changes include:
1) Ensuring the guidance addresses challenges associated with pull and subscription exchange mechanisms.
2) Ensuring the exchange mechanisms can support the use of messaging protocols.
3) Ensuring support for additional use cases including Colorectal Cancer Screening and Hospital Reporting for Venous Thromboembolism and Stroke reporting.
4) Ensuring support for communication of quality measurement results.
FHIR_IG_QMEXCHANGE_R1_D2_2019MAY 2019/02/252019/03/28
Clinical Quality Information1142HL7 Version 3 Implementation Guide: Clinical Quality Language (CQL)-based Health Quality Measure Format (HQMF), Release 1 - US RealmV3 4th STU BallotThe CQL-Based HQMF Implementation Guide provides guidance and conformance requirements for defining and sharing electronic Clinical Quality Measure (eCQM) specifications. The guide defines an approach to specifying eCQMs using Clinical Quality Language (CQL) and Quality Data Model (QDM). Since the last ballot of this material in 2019MAY , the following changes have been made: This update addresses STU comments submitted during the trial-use period, as well as several known issues reported through usage and implementation. In addition, the update incorporates changes to support CQL STU 4 and QDM 5.5.V3_IG_CQL_HQMF_R1_D4_2019MAY 2019/02/252019/03/28
Community-Based Care and Privacy (CBCP)1431HL7 FHIR® Implementation Guide: Electronic Long-Term Services & Supports (eLTSS), Release 1 - US RealmFHIR 1st STU BallotThis IG provides the opportunity to implement eLTSS FHIR based solutions which will have a transformative impact on the collection, exchange and sharing of Home and Community Based Services (HCBS) data, clinical data and provider service plans. Since the last ballot of this material in 2019MAY , the following changes have been made: This FHIR IG will implement the previously balloted and published mappings to the HL7 Cross-Paradigm Guidance: Electronic Long-Term Services & Supports (eLTSS), Release 1 - US Realm (eLTSS data set).FHIR_IG_eLTSS_R1_D1_2019MAY 2019/02/252019/03/28
Devices1277HL7 FHIR® Implementation Guide: Personal Health Device (PHD), Release 1FHIR 3rd STU BallotThis implementation guide provides the mapping of data from IEEE 11073 Personal Health Devices to FHIR by developing and using FHIR profiles.Since the last ballot of this material in 2019MAY , the following changes have been made: The main change includes implemented resolutions resulting from comments gathered in the previous ballogFHIR_IG_PHD_R1_D3_2019MAY 2019/02/252019/03/28
FHIR Infrastructure1497HL7 FHIR® Implementation Guide: Bulk Data, Release 1FHIR 1st STU BallotThis Implementation Guide will provide guidance for enabling secure bulk data transfer for FHIR resources. The guide will define the application programming interfaces (APIs) through which an authenticated and authorized clients may request a bulk data export from a server, receive status information regarding progress in the generation of the requested files, and receive these files securely using a back end service authorization.Since the last ballot of this material in 2019MAY , the following changes have been made: First ballotFHIR_IG_BULKDATA_R1_D1_2019MAY 2019/02/252019/03/28
FHIR Infrastructure1433HL7 FHIR® Implementation Guide: Patient Reported Outcomes (PRO), Release 1 - US RealmFHIR 1st STU BallotThe Patient Reported Outcomes (PRO) FHIR Implementation Guide (IG) will focus on capturing and exchanging patient reported outcome data electronically using the FHIR standard. The data that is captured will be made available to both providers and authorized researchers. While the PRO FHIR IG can be applied to multiple use cases, the current requirements have been drawn from PCORnet use cases and implementations.Since the last ballot of this material in 2019MAY , the following changes have been made: The version of the IG is backwards compatible with the previous version of the IG. The IG is built on the latest release of FHIR namely R4. The changes from the previous version to the current version including clarifying various parts of the IG based on ballot comments received, adding examples and updating implementation guidance for developers. FHIR_IG_PRO_R1_O1_2018SED1_2019MAY 2019/02/252019/03/28
FHIR Infrastructure1390HL7 FHIR® Implementation Guide: Structured Data Capture (SDC), Release 2FHIR 1st STU BallotSDC provides guidance on how to use Questionnaire and QuestionnaireResponse for more sophisticated questionnaires, such as are used in the research, payment, public health and other areas. It includes controls over rendering, data entry, calculations, population from existing data, converting questionnaire responses to other FHIR resources and describes how to produce adaptive questionnaires.Since the last ballot of this material in 2019MAY , the following changes have been made: The updated SDC specification changes expectations for population and introduces extraction and adaptive questionnaire capabilities. It lightens expectations for conformance and provides additional rendering and calculation capabilities.FHIR_IG_SDC_R2_O1_2018SED1_2019MAY 2019/02/252019/03/28
Financial Management1490HL7 FHIR® Implementation Guide: Authorization, Release 1- US Realm

Requesting alternate ballot title "HL7 FHIR® Implementation Guide: Prior Authorization, Release 1"
FHIR 1st STU BallotThis implementation guide will provide a standard for adoption by both providers and payers for the exchange of information necessary for authorization of services by a payer.Since the last ballot of this material in 2019SEP , the following changes have been made: N/AFHIR_IG_AUTH_R1_D1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Financial Management1428HL7 FHIR® Implementation Guide: Coverage Requirements Discovery, Release 1 - US RealmFHIR 2nd STU BallotIn the US clinicians are often unaware of the expectations of payor organizations around care delivery, requirements for pre-authorizations and other processes. This results in denied payment, changes to therapy after initiation and/or additional overhead costs are incurred. Defining a standardized mechanism by which care delivery organizations and providers can query payors to find relevant guidance prior to care delivery will increase efficient delivery of care and corresponding payment.Since the last ballot of this material in 2019MAY , the following changes have been made: Changes were made throughout the guide to respond to comments made during the prior ballot period "Ballot for Comment". FHIR_IG_COVREQDISC_R1_D2_2019MAY 2019/02/252019/03/28
Financial Management1489HL7 FHIR® Implementation Guide: ePayer Data Exchange (ePDx), Release 1 - US RealmFHIR 1st STU BallotThis IG defines exchange methods (push, pull, triggers, subscription), use of other interoperability "standards" (e.g. CDS Hooks and SMART on FHIR) and specific use of FHIR resources to effectively exchange payer information regarding the current or previous care, including the provenance of the data, of one or more specific patients/members with a provider responsible for evaluating/specifying/ordering/delivering care for the patient.Since the last ballot of this material in 2019SEP , the following changes have been made: N/AFHIR_IG_ePDx_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Imaging Integration1392HL7 FHIR® Implementation Guide: FHIRCast, Release 1FHIR 1st STU BallotFHIRcast synchronizes healthcare applications in real time to show the same clinical content to a common user. For example, a radiologist often works in three disparate applications at the same time (a radiology information system, a PACS and a dictation system), she wants each of these three systems to display the same study or patient at the same time. FHIRcast isn't limited to radiology use-cases. Since the last ballot of this material in 2020FEB , the following changes have been made: N/AFHIR_IG_FHIRCast_R1_D1_2019MAY 2019/02/252019/03/28
Learning Health Systems1317HL7 Domain Analysis Model: Patient Centered Care Team, Release 1

Requesting alternate ballot title "The second comment only ballot was withdrawn, therefore this is the second ballot"
HL7 1st Informative BallotIn a learning health system each activity in care and health promotion is informed by the collective knowledge of the system and the results of each activity update the knowledge of the system. Essential to such a system is the formal model which defines the roles and relationships of each entity which fulfills a role on the virtual team around each patient which this document describesSince the last ballot of this material in 2020MAY , the following changes have been made: Updated based on comments in 1st comment only ballot logical model of relationships between care team members and definitions (including model) of non-credentialed/non-professional caregivers on the care team. There has, in particular, been expansion of the attributes and concepts related to roles that may be filled either by healthcare professionals or by family members and community members involved in the care of a patient. HL7_DAM_PCCT_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Orders and Observations1496HL7 FHIR® Implementation Guide: DME Orders, Release 1- US RealmFHIR 1st STU BallotInitial FHIR based implementation guide for DME orders between a provider and a DME supplier.Since the last ballot of this material in 2020MAY , the following changes have been made: New document.FHIR_IG_DME_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Orders and Observations1238HL7 Domain Analysis Model: Unique Device Identifier (UDI) Implementation Guidance, Release 1HL7 3rd Informative BallotThe focus of this ballot is to address the implantable
devices unique identification needs and support for implantable device list (e.g. Meaningful Use 2015 certification requirements).
Since the last ballot of this material in 2020MAY , the following changes have been made: This version addresses the comments received in the first
ballot.
HL7_DAM_UDI_IG_REQ_R1_I3_2019MAY 2019/02/252019/03/28
Patient Care1495HL7 FHIR® Implementation Guide: Clinical Data Exchange (CDex), Release 1- US RealmFHIR 1st STU BallotThe scope of the CDex project is to defined combinations of exchange methods (push, pull, subscribe, CDS Hooks, …), specific payloads (Documents, Bundles, and Individual Resources), search criteria, conformance, provenance, and other relevant requirements to support specific exchanges of clinical information between provider and other providers and/or payers. Since the last ballot of this material in 2019SEP , the following changes have been made: N/AFHIR_IG_CDex_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Pharmacy1139HL7 CDA® R2 Implementation Guide: Pharmacy Templates, Release 1 STU Release 2

Requesting alternate ballot title "HL7 CDA® R2 Implementation Guide: Pharmacy Templates, Release 1 STU 2"
CDA-Related 2nd STU BallotThe Pharmacy Templates Implementation Guide defines common pharmacy artifacts (order, dispense, administration and statement) in CDA R2 form. The scope of this ballot is limited to the new content for Medication Dispense and Medication Administration Templates. Feedback not related to these templates will be found "not related" and should be made via the STU change request process.Since the last ballot of this material in 2019MAY , the following changes have been made: Since the last ballot of this material in 2018MAY, the following changes to add Medication Dispense and Medication Administration Templates have been made. In addition, ballot reconciliation on Medication Order and Medication Statement have been applied.CDAR2_IG_PHARM_TEMPLATES_R1_D2_2019MAY 2019/02/252019/03/28
Public Health1002HL7 CDA® R2 Implementation Guide: National Health Care Surveys (NHCS), Release 1 STU Release 2 – US Realm

Requesting alternate ballot title "HL7 CDA® R2 Implementation Guide: National Health Care Surveys (NHCS), R1 STU Release 2 - US Realm"
CDA 3rd STU BallotThis project developed an HL7 CDA IG for representing data collected by the CDC NCHS within the Division of Health Care Statistics (DHCS). The data are collected through surveys of ambulatory, inpatient, and outpatient care services in the United States: the National Ambulatory Medical Care Survey (NAMCS), the National Hospital Care Survey (NHCS) and the National Hospital Ambulatory Medical Care Survey (NHAMCS). This includes mapping data elements required by the surveys to existing templates.Since the last ballot of this material in 2019SEP , the following changes have been made: Update the IG based on implementer feedback contained in the STU comments.CDAR2_IG_NHCS_R1_D3_2019MAY 2019/02/252019/03/28
Public Health1216HL7 CDA® R2 Implementation Guide: Public Health Case Report - the Electronic Initial Case Report (eICR) Release 1, STU Release 2.0 - US Realm

Requesting alternate ballot title "HL7 CDA® R2 Implementation Guide: Public Health Case Report, Release 2 - the Electronic Initial Case Report (eICR) Release 1, STU Release 2.0 - US Realm"
CDA 2nd STU BallotThis implementation guide specifies an electronic initial case report (eICR) to support public health reporting of reportable conditions from healthcare organizations to public health agencies are required by law. Since the last ballot of this material in 2019MAY , the following changes have been made: STU comments will be addressed, Pregnancy Status, Occupational Data for Health, Vital Signs, Lab Results Status and Specimen SourceCDAR2_IG_PHCASERPT_R2_D2_2019MAY 2019/02/252019/03/28
Public Health1423HL7 FHIR® Implementation Guide: Bidirectional Services eReferrals (BSeR), Release 1 - US RealmFHIR 2nd STU BallotThe Bidirectional Services eReferrals (BSeR) FHIR IG provides guidance on STU3 FHIR Resources and US Core IG profiles for use in exchanging a referral request and specific program data from a clinical provider to a typically extra-clinical program service provider, such as a diabetes prevention program, a smoking quitline, or a hypertension management training program. And provides for the return of feedback information from the service program to the referring provider.Since the last ballot of this material in 2019MAY , the following changes have been made: This BSeR was included in the September 2018 ballot cycle. This iteration addresses the negative comments received. The major changes are the addition of terminology, artifacts to implement an exchange workflow, and repair of broken links in the specification.FHIR_IG_BSeR_R1_D2_2019MAY 2019/02/252019/03/28
Public Health1475HL7 FHIR® Implementation Guide: Vital Records Mortality and Morbidity Reporting, Release 1 - US RealmFHIR 1st STU BallotThe VRDR FHIR IG provides guidance regarding the use of FHIR resources for the bidirectional exchange of mortality data between State-run PHA Vital Records offices and NCHS.Since the last ballot of this material in 2019MAY , the following changes have been made: All of the material in this specification is new and does not contain changes to any previously balloted material.FHIR_IG_VRDR_R1_D1_2019MAY 2019/02/252019/03/28
Public Health1477HL7 Version 2.6 Implementation Guide: Vital Records Death Reporting, Release 1 - US RealmV26 1st STU BallotVital Records death reporting has been developed as STU. A new STU version is
needed to support additional requirements based on the addition of new
stakeholders who will be involved with data exchange. The new stakeholders
include funeral directors, and medical examiners, as well as the Electronic Death
Registration System.
Since the last ballot of this material in 2019MAY , the following changes have been made: The changes will include the addition of new stakeholders participating in the data
exchange and the associated messaging interactions. The new stakeholders include
funeral directors, and medical examiners. In addition the role of the Electronic
Death Registration System will be explicitly recognized. It is expected that very
little new data will be required, but additional conformance profiles are expected
to recognize the role of new stakeholders.
V26_IG_VRDR_R1_D1_2019MAY 2019/02/252019/03/28
Services Oriented Architecture1420HL7 Cross Paradigm Model Transformation Service, Release 1HL7 1st STU BallotThis project will create a functional specification for transformation services with exemplary mappings using storyboards developed by the SOA Working Group, the interested parties of the Project, and co-sponsor WGs of this project. The project will create story boards that use aspects of 1) the current versions of HL7 Standards of V2, C-CDA, and FHIR, and 2) new information models such as CIMI and realm specific examples such as the FHIM. Since the last ballot of this material in 2020FEB , the following changes have been made: N/AHL7_MODEL_XFORM_R1_O1_2019MAY 2019/02/252019/03/28
Structured Documents1480HL7 Guidance: CDA Implementation Guide Quality Criteria Maintenance, Release 1CDA 1st Comment-Only BallotThis document will contain the proposed starting set of CDA Implementation Guide Quality Criteria. The initial set of criteria are based on the long standing CDA IG quality criteria developed by the Structured Documents work group. This draft for comment ballot is intended to gather comments on this starter set of criteria. Once finalized, the CDA Management Group will be responsible for evaluating the degree to which all HL7 CDA IG's meet these criteria.Since the last ballot of this material in 2019MAY , the following changes have been made: N/ACDA_IG_QUAL_CRIT_R1_O1_2019MAY 2019/02/252019/03/28
Structured Documents1232HL7 CDA® R2 Implementation Guide: Pharmacist Care Plan Document, Release 1 - US RealmCDA 1st STU BallotThe goal of this project is to develop an electronic care plan with enhanced medication management content based on the templates in the HL7 Implementation Guide for C-CDA Release 2.1: Consolidated CDA for Clinical Notes. Since the last ballot of this material in 2019MAY , the following changes have been made: Apply changes from comment-only ballot reconciliation and add bindings to PharmacyHIT value sets currently in VSAC. CDAR2_IG_CCDA_MTM_CAREPLAN_R1_D1_2019MAY 2019/02/252019/03/28
Structured Documents1192HL7 CDA® R2 Implementation Guide: Healthcare Associated Infection Reports, Release 3 - US RealmCDA 1th Normative BallotWith cooperation from CDC and Healthcare Associated Infections (HAI) software vendors, document will be STU Release 4 of the HL7 Implementation Guide for CDA® Release 2: Healthcare Associated Infection Reports Release 3. The IG will continue to support electronic submission of HAI data to the National Healthcare Safety Network. This document is the fourth STU release and will include new outpatient forms, LOS/MEN denominator and updates to selected existing forms and vocabulary.Since the last ballot of this material in 2020MAY , the following changes have been made: Addition of forms: Outpatient Same Day Outcome Measures Event, Outpatient Same Day Outcome Measures Summary, Outpatient Procedure Denominiator, Outpatient SSI (Surgical Site Infection) Event, LOS (Late Onset Sepsis)/MEN (Meningitis) Denominator and updates to selected existing forms and vocabulary. CDAR2_IG_HAIRPT_R3_D4_2019MAY 2019/02/252019/03/28
Structured Documents977HL7 CDA® R2 Implementation Guide: Questionnaire Response Document, Release 1CDA 2nd Normative BallotThis ballot is for an implementation guide defining
Questionnaire Response Document for purpose of
representing patient responses to questionnaires as a
structured document reusing and/or enhancing existing
CDA templates where possible creating new CDA
templates where necessary.
Since the last ballot of this material in 2020FEB , the following changes have been made: This is the second Normative ballot for this document.
The changes made to the document reflect the resolutions
that were agreed to by the working group. Both substantive
and non-substantive changes were made. As this is the
second Normative ballot for this IG, the ballot comments are
limited to only the substantive changes. The substantive
changes were due to the following N1 comments:
1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 13, 16, 18, 31, 56, 60.
Comments during this second (N2) ballot are resticted to
those (subsantive) changes only. The corresponding final
reconciliation spreadsheet can be found here:
http://wiki.hl7.org/images/6/6b/CDAR2_IG_QRDOC_R1_N1_2017JAN_amalgamated_January042018-FINAL_Jan292019.xls
CDAR2_IG_QRDOC_R1_N2_2019MAY 2019/02/252019/03/28
Structured Documents976HL7 CDA® R2 Implementation Guide: Structured Form Definition Document, Release 1CDA 2nd Normative BallotThis ballot is for an implementation guide defining a
Structured Form Definition Document for purpose
of representing patient questionnaires as a structured
document reusing and/or enhancing existing CDA templates
where possible creating new CDA templates where necessary.
Since the last ballot of this material in 2020FEB , the following changes have been made: This is the second Normative ballot for this document.
The changes made to the document reflect the resolutions
that were agreed to by the working group. Both substantive
and non-substantive changes were made. As this is the
second Normative ballot for this IG, the ballot comments are
limited to only the substantive changes. The substantive
changes were due to the following N1 comments: 1, 7, 11,
21, 25, 28, 29, 32, 33, 34, 35, 36, 37, 38, 39, 45, 46, 47.
Comments during this second (N2) ballot are restricted to
those (substantive) changes only. The corresponding final
reconciliation spreadsheet can be found here:
http://wiki.hl7.org/images/5/50/CDAR2_IG_SFDEFDOC_R1_N1_2017JAN_amalgamated_January042018-FINAL_Jan292019.xls
CDAR2_IG_SFDEFDOC_R1_N2_2019MAY_WITHDRAWN 2019/02/252019/03/28
Structured Documents1232HL7 FHIR® Implementation Guide: Pharmacist Care Plan Document, Release 1 - US RealmFHIR 1st STU BallotThe goal of this project is to develop an electronic care plan with enhanced medication management content based on the FHIR profiles in the HL7 Implementation Guide for C-CDA on FHIR and the US Core specification.
Since the last ballot of this material in 2019MAY , the following changes have been made: Apply changes from comment-only ballot reconciliation and add bindings to PharmacyHIT value sets currently in VSAC. FHIR_IG_CCDA_MTM_CAREPLAN_R1_D1_2019MAY 2019/02/252019/03/28
Structured Documents1192HL7 FHIR® Implementation Guide: Healthcare Associated Infection Reports, Release 1 - US RealmFHIR 2nd STU BallotWith cooperation from CDC and Healthcare Associated Infections (HAI) software vendors, document will be STU Release 2 of the HL7 Implementation Guide for FHIR®: Healthcare Associated Infection Reports Release 1. The implementation guide will add to the CDA support of electronic submission of HAI data to the National Healthcare Safety Network. This document is the second STU release and will include the new outpatient forms and LOS/MEN denominator form.Since the last ballot of this material in 2019MAY , the following changes have been made: Addition of forms: Outpatient Same Day Outcome Measures Event, Outpatient Same Day Outcome Measures Summary, Outpatient Procedure Denominiator, Outpatient SSI (Surgical Site Infection) Event, LOS (Late Onset Sepsis)/MEN (Meningitis) Denominator. FHIR_IG_HAI_R1_D2_2019MAY 2019/02/252019/03/28

Postponed Ballots 


Work GroupProject IDBallot NameFamilyBallot IterationBallot DescriptionLast BallotedUnique Ballot IDPool enrollment opensPool enrollment closes
Anesthesia1153HL7 Domain Analysis Model: Intra-Procedure Anesthesia, Release 1HL7 1st Informative BallotThe Anesthesia (intra-procedure) Domain Analysis Model will focus on the intra-procedure anesthetic process and its documentation in the anesthetic record. The goal of this project is to support the exchange and understanding of anesthesiology data by establishing:

• A structural outline of the anesthetic record
• Detailed models of significant components of intra-procedural anesthesia
• Standard terms and definitions for common anesthesiology data elements

Since the last ballot of this material in 2020MAY , the following changes have been made: None/not-applicableHL7_DAM_ANESTH_R1_I1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Clinical Interoperability Council1363HL7 FHIR® Implementation Guide: Breast Cancer Data, Release 1- US RealmFHIR 3rd STU BallotCIMI Logical Models and FHIR Profiles for Breast-Cancer focused Radiology in collaboration with RSNA and ACR.Since the last ballot of this material in 2020MAY , the following changes have been made: This will be the first ballot of this material 'for comment' with subsequent ballots to target Informative and STU by January 2020. FHIR_IG_BRCANCER_R1_O3_2019MAY_WITHDRAWN 2019/02/252019/03/28
Clinical Interoperability Council1494HL7 FHIR® Implementation Guide: Health Record Exchange (HRex) Framework, Release 1- US RealmFHIR 1st STU BallotThe scope of the HRex Framework project is to define combinations of exchange methods, specific payloads, search criteria, conformance, provenance, and other relevant requirements to support specific exchanges of clinical information between: 1) providers, 2) a provider and a payer, 3) a payer and providers, and/or a provider and any third party involved in value based care.Since the last ballot of this material in 2019SEP , the following changes have been made: N/AHL7_FHIR_IG_HRex_2019MAY_WITHDRAWN 2019/02/252019/03/28
Financial Management1490HL7 FHIR® Implementation Guide: Authorization, Release 1- US Realm

Requesting alternate ballot title "HL7 FHIR® Implementation Guide: Prior Authorization, Release 1"
FHIR 1st STU BallotThis implementation guide will provide a standard for adoption by both providers and payers for the exchange of information necessary for authorization of services by a payer.Since the last ballot of this material in 2019SEP , the following changes have been made: N/AFHIR_IG_AUTH_R1_D1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Financial Management1489HL7 FHIR® Implementation Guide: ePayer Data Exchange (ePDx), Release 1 - US RealmFHIR 1st STU BallotThis IG defines exchange methods (push, pull, triggers, subscription), use of other interoperability "standards" (e.g. CDS Hooks and SMART on FHIR) and specific use of FHIR resources to effectively exchange payer information regarding the current or previous care, including the provenance of the data, of one or more specific patients/members with a provider responsible for evaluating/specifying/ordering/delivering care for the patient.Since the last ballot of this material in 2019SEP , the following changes have been made: N/AFHIR_IG_ePDx_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Learning Health Systems1317HL7 Domain Analysis Model: Patient Centered Care Team, Release 1

Requesting alternate ballot title "The second comment only ballot was withdrawn, therefore this is the second ballot"
HL7 1st Informative BallotIn a learning health system each activity in care and health promotion is informed by the collective knowledge of the system and the results of each activity update the knowledge of the system. Essential to such a system is the formal model which defines the roles and relationships of each entity which fulfills a role on the virtual team around each patient which this document describesSince the last ballot of this material in 2020MAY , the following changes have been made: Updated based on comments in 1st comment only ballot logical model of relationships between care team members and definitions (including model) of non-credentialed/non-professional caregivers on the care team. There has, in particular, been expansion of the attributes and concepts related to roles that may be filled either by healthcare professionals or by family members and community members involved in the care of a patient. HL7_DAM_PCCT_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Orders and Observations1496HL7 FHIR® Implementation Guide: DME Orders, Release 1- US RealmFHIR 1st STU BallotInitial FHIR based implementation guide for DME orders between a provider and a DME supplier.Since the last ballot of this material in 2020MAY , the following changes have been made: New document.FHIR_IG_DME_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Patient Care1495HL7 FHIR® Implementation Guide: Clinical Data Exchange (CDex), Release 1- US RealmFHIR 1st STU BallotThe scope of the CDex project is to defined combinations of exchange methods (push, pull, subscribe, CDS Hooks, …), specific payloads (Documents, Bundles, and Individual Resources), search criteria, conformance, provenance, and other relevant requirements to support specific exchanges of clinical information between provider and other providers and/or payers. Since the last ballot of this material in 2019SEP , the following changes have been made: N/AFHIR_IG_CDex_R1_O1_2019MAY_WITHDRAWN 2019/02/252019/03/28
Structured Documents976HL7 CDA® R2 Implementation Guide: Structured Form Definition Document, Release 1CDA 2nd Normative BallotThis ballot is for an implementation guide defining a
Structured Form Definition Document for purpose
of representing patient questionnaires as a structured
document reusing and/or enhancing existing CDA templates
where possible creating new CDA templates where necessary.
Since the last ballot of this material in 2020FEB , the following changes have been made: This is the second Normative ballot for this document.
The changes made to the document reflect the resolutions
that were agreed to by the working group. Both substantive
and non-substantive changes were made. As this is the
second Normative ballot for this IG, the ballot comments are
limited to only the substantive changes. The substantive
changes were due to the following N1 comments: 1, 7, 11,
21, 25, 28, 29, 32, 33, 34, 35, 36, 37, 38, 39, 45, 46, 47.
Comments during this second (N2) ballot are restricted to
those (substantive) changes only. The corresponding final
reconciliation spreadsheet can be found here:
http://wiki.hl7.org/images/5/50/CDAR2_IG_SFDEFDOC_R1_N1_2017JAN_amalgamated_January042018-FINAL_Jan292019.xls
CDAR2_IG_SFDEFDOC_R1_N2_2019MAY_WITHDRAWN 2019/02/252019/03/28

For more information on ballot procedure, such as general guidelines, and voting, see Ballot Procedures and Guidelines

For Help, see Balloting Help

  • No labels